Tuesday, May 5, 2009

LOL (Lap Out Loud)

While working on the YsBox, I was interested in ways of improving the cooling scheme. The stock Dell heat sink for the main processor has a nice big slab of copper, but the surface is far from perfect. A while back I had done some reading on the process of "lapping." Lapping is merely creating a surface that is as flat as possible. Heat sinks (both discrete and integrated, integrated being those that are permanently fixed to a processor) can be lapped using tools as simple as a piece of glass and varying grits of sandpaper.

I read a hand full of guides on the subject, but I found this "how to" video to be the most comprehensive: Part 1, Part 2. After lapping, both my CPU's integrated heat sink and the main CPU heatsink (using 400-2000 grit), temperatures really didn't seem to drop (disappointing). Mechanically / theoretically it is indeed a better setup as there is much more uniform physical contact between the two parts, but apparently this CPU just doesn't get hot enough to utilize such a setup (afaik, most people who do this are overclocking their CPU's).

In the end, I'm still happy I did this process for the great learning experience.

No comments:

Post a Comment